AddictedToToneInc ships very quickly, usually the same day an order was. That adversely affect road conditions and orders received after 3:00pm EST. Items are inspected, tested and well packaged by me personally after. Thank you for understanding, your order will be appreciated. Well packaged and dispatched very quickly.As a gigging and touring guitarist I understand how important these items are! William Bill Sutherland / AddictedToToneInc.
AddictedToToneInc places 35+ Years of Takamine. Please take the time to read the entire listing.
The information it contains can answer many questions you may have. If you are still unsure about a detail please contact me; I will help you! Of this item and it is temporarily. If interested please contact AddictedToToneInc.To be included on a waiting list to be notified. When the item becomes available. Photographic and written work presented in this ad are property of AddictedToToneInc. Any portion of its use.
This listing is for ONE (1). Saddle measurements are shown in the photographs. This uncut bone saddle is factory fresh and. Will require some minor adjustment / fine tuning. The TP0706AE saddle is used on both 6 and 12 string Takamine.Pro Series guitars that have Takamine Factory installed electronics. Please read the item description carefully and look. At the photographs as they are part of the description.
Other items shown in photographs are for display purposes only and are not included in the sale. The Takamine TP0706AE STRAIGHT saddle is designed. Exclusively for Takamine Pro Series instruments.
That have factory installed electronics. If your guitar does not have electronics the TP0706AE is not the right saddle for you. The TP0706A STRAIGHT Saddle is designed for Takamine Pro Series.
Acoustic Guitars that use STEEL strings and do not have electronics. The TP0706AE is NOT the correct saddle for NYLON String instruments. Other saddle components and parts. What is a Factory Blank Saddle.
A Factory Blank Saddle is an unfinished saddle that is cut to approximate size and preshaped but will need to be finish sanded to exact size to match the saddle slot of a specific. Takamine guitar model and to provide the string height preferred by the end user. The radius and top profile of the saddle will arrive in finished condition; what will need to be sanded are the side(s) and possibly the bottom of the saddle. A Factory Blank Saddle will often have some unevenness and even occasionally a minute chip on the bottom or side of the saddle that is still in unfinished condition.
This is NOT a defect; this is common to the unfinished Takamine bone saddle; these areas will be removed upon the sanding required to finish the saddle. These are the same Takamine saddle blanks used by technicians at the Takamine factory in Japan. Factory Blank Saddles are built specifically with Right or Left handed saddle profiles and can not be interchanged. If you need a Left Handed profile saddle please contact AddictedToToneInc regarding their availability. BONE SADDLE TIP FROM BILL.
A finger nail EMERY BOARD is perfect for finishing the saddle. A medium to coarse grade sand paper will remover material quickly, a fine grade sand paper should be used to finish. The side of the saddle that touches the pearloid DOT does not need to be adjusted only the center edge of the saddle may need rounding to match the saddle slot perfectly. If material needs be taken from the bottom of the saddle to lower string action or the sides of the saddle (if the saddle is to tight do not force it into the slot).Make sure the emery board is laying on a flat service and move the saddle across it while the emery board remains motionless. Do not try to hold the saddle and remove material from the bottom or side area. A precise 90 degree angle should be. To find and custom made items for musicians who are serious about their tone! Sometimes in this fast paced electronics driven world we lose touch with the humanity. I welcome your questions and speaking with you personally. As a consumer I understand the desire to save a couple dollars whenever possible. The item listed in this ad is designed to improve the tone. Of your Takamine guitar or for replacing a defective component. I can help you diagnose the problem with your Takamine system. Please contact me before you order an item you do not actually need. Specifically repair technicians that do not know how to properly diagnose. Possible defects of the individual components used in the Takamine electronic system. AddictedToToneInc checks each component for possible electronic defect. When the new product is received from Takamine and.
Non electronic parts like Tuners, Nuts, Saddles are carefully inspected and tested; any part that requires assembly is assembled. The testing process was originally started for the sake of my over-seas patrons but I quickly realized the value of it for all my clients! I have designed, created and employ special testing equipment for the Takamine preamps and electronic componentsbecause it is your reputation as well as mine at stake when you walk on stage!AddictedToToneInc hosts a special Facebook page that specializes in the science and use of the Takamine technology exclusively for our Takamine clients. If you are having your item delivered to a temporary living. Address: Hotel, Motel, Day Suite etc.
Make sure the name listed on the package is also attached to. If the recipients name on the.
Package does not match a name in the guest registry there is no. The item "Takamine Pro Series STRAIGHT SADDLE / Genuine OEM Part / uncut BONE -TP0706AE" is in sale since Monday, April 9, 2018.
This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Saddles". The seller is "addictedtotoneinc" and is located in Floyds Knobs, Indiana. This item can be shipped worldwide.