Any portion of its use. This listing is for ONE (1).Saddle measurements are shown in the photographs. This uncut bone saddle set is factory fresh and. Will require some minor adjustment / fine tuning. Please read the item description carefully and look.
At the photographs as they are part of the description. Other items shown in photographs are for display purposes only and are not included in the sale. The Takamine TP0709AE saddle set is designed. Exclusively for Takamine Pro Series instruments.
That have factory installed electronics. If your guitar DOES NOT have electronics. This is not the right saddle set for you.
The TP0709A Saddle set is designed. For Takamine Pro Series Acoustic Guitars.
That DO NOT have factory installed elctronics. The TP0709AE saddle is made for Pro Series. Guitars WITH factory installed electronics.Other saddle components and parts. What is a Factory Blank Saddle. A Factory Blank Saddle is an unfinished saddle that is cut to approximate size and preshaped but will need to be finish sanded to exact size to match the saddle slot of a specific.
Takamine guitar model and to provide the string height preferred by the end user. The radius and top profile of the saddle will arrive in finished condition; what will need to be sanded are the side(s) and possibly the bottom of the saddle. A Factory Blank Saddle will often have some unevenness and even occasionally a minute chip on the bottom or side of the saddle that is still in unfinished condition. This is NOT a defect; this is common to the unfinished Takamine bone saddle; these areas will be removed upon the sanding required to finish the saddle. These are the same Takamine saddle blanks used by technicians at the Takamine factory in Japan.Factory Blank Saddles are built specifically with Right or Left handed saddle profiles and can not be interchanged. If you need a Left Handed profile saddle please contact AddictedToToneInc regarding their availability. BONE SADDLE TIP FROM BILL. A finger nail EMERY BOARD is perfect for finishing the saddle.
A medium to coarse grade sand paper will remover material quickly, a fine grade sand paper should be used to finish. The side of the saddle that touches the pearloid DOT does not need to be adjusted only the center edge of the saddle may need rounding to match the saddle slot perfectly. If material needs be taken from the bottom of the saddle to lower string action or the sides of the saddle (if the saddle is to tight do not force it into the slot). Make sure the emery board is laying on a flat service and move the saddle across it while the emery board remains motionless.
Do not try to hold the saddle and remove material from the bottom or side area. A precise 90 degree angle should be. To find and custom made items for musicians who are serious about their tone! Sometimes in this fast paced electronics driven world we lose touch with the humanity. I welcome your questions and speaking with you personally.
As a consumer I understand the desire to save a couple dollars whenever possible. Please contact me before you order an item you do not actually need. The TP0709AE saddle set comes as a factory fresh blank and.Will most likely require some finishing to fit your guitar. Pro Series Takamine guitars with SPLIT saddles and factory installed electronics. Tall side (G string) 27/64. 27/64ths is slighter larger than 3/8ths and smaller than 7/16ths.
Short side (Low E string) 11/32nd / 9.0mm. Length: 1 / 25.50mm. Tall side (B string) 27/64. Short side (High E string) 5/16. 7/64th is slightly less than 1/8th.
Actual Measurements may vary slightly due to manufacturing process. Non electronic parts like Tuners, Nuts, Saddles are carefully inspected and tested; any part that requires assembly is assembled.
The testing process was originally started for the sake of my over-seas patrons but I quickly realized the value of it for all my clients! I have designed, created and employ special testing equipment for the Takamine preamps and electronic componentsbecause it is your reputation as well as mine at stake when you walk on stage! AddictedToToneInc hosts a special Facebook page that specializes in the science and use of the Takamine technology exclusively for our Takamine clients.
If you are having your item delivered to a temporary living. Address: Hotel, Motel, Day Suite etc. Make sure the name listed on the package is also attached to. If the recipients name on the. Package does not match a name in the guest registry there is no.
The item "Takamine Pro Series SPLIT SADDLE / Genuine OEM Part / unfinished BONE -TP0709AE" is in sale since Friday, July 7, 2017. This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Saddles". The seller is "addictedtotoneinc" and is located in Floyds Knobs, Indiana. This item can be shipped worldwide.