Genuine Part Oem

04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator


04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator
04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator
04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator
04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator
04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator
04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator
04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator

04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator   04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator
04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator. Fits both LH (Driver Side) & RH (Passenger Side) FRONT.

Replaces dealer part number: 7L1Z-3C247-A, 7L1Z3C247A. Built to strict quality control standards.

These actuators makes a great replacement and has good cost savings over the dealer part! 2003-14 Ford Expedition Front Pair.

2005-14 Ford F150 Truck Front Pair. 2004 Ford F150 Truck New Body Style Front Pair. 2006-08 Lincoln Mark LT Front Pair.

2003-14 Lincoln Navigator Front Pair. STEP 1: RAISE AND SECURE THE VEHICLE.

Raise the vehicle with a jack. Secure the vehicle on jack stands. STEP 2: REMOVING THE CV AXLE SHAFT. Pry off the wheel center cap with a flat blade screwdriver. Remove the cap over the hub nut.

Remove the 13mm hub nut. While holding the tire in place, remove the six twelve-point 12mm bolts from the CV joint.

Remove the 30mm bolt from the strut assembly using a breaker bar or ratchet and pipe. Tap the nut with a hammer to loosen it, if necessary.

Pry the lower end of the strut assembly from the lower control arm with a pry bar. Pull out the CV shaft.

STEP 3: REMOVING THE FOUR WHEEL DRIVE ACTUATOR. Remove the three 8mm bolts from the four wheel drive actuator. Pry off the actuator with a flat blade screwdriver. Disconnect the vacuum hoses from the actuator. STEP 4: INSTALLING THE NEW ACTUATOR.

Connect the vacuum hoses to the new actuator. Put the actuator into place. Start the three 8mm bolts by hand.

Tighten the three 8mm bolts. STEP 5: REATTACHING THE CV AXLE. Slide the CV Axle back into place.

Reconnect the strut at the lower control arm. Push the bolt through where the strut connects to the lower control arm. Tighten the bolt to between 95-100 foot-pounds of torque. Start the 12-point 12mm bolts into the CV axle by hand. Tighten the bolts to 25 foot-pounds in a crossing or star pattern. Reinstall the 13mm nut on the end of the axle.

Reinstall the cap over the nut. Professional installation is highly recommended. Nzone Auto is a professional suppliers in automotive field, we can provide the best products with best quality, 100% customer satisfactory is always our goal.

The item "04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator" is in sale since Tuesday, March 5, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Automatic Transmission & Parts\Automatic Transmission Parts".

The seller is "nzonemotor3" and is located in CA. This item can be shipped to United States.

  1. Other Part Number: 7L1Z-3C247-A (x2)
  2. Placement on Vehicle: Front, Left, Right
  3. Surface Finish: Steel
  4. Brand: nzonemotor3
  5. Manufacturer Part Number: 7L1Z-3C247-A (x2)
  6. UPC: 612292613228
  7. Model: F-150 F150 Heritage Expedition Navigator
  8. Make: Ford Lincoln
  9. Product Notes: With Four Wheel Drive (4x4)
  10. Warranty: 3 Year
  11. Year: 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
  12. Year..

    : 2013 2014 2015

  13. Housing Material: Steel
  14. Fitment Type: Direct Replacement


04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator   04 thru 14 F-150 OEM Genuine Ford Parts IWE 4WD Auto Hub Lock Actuator